May 20, 2012, 12:36:50 PM
Pages: [1]

Author Topic: e85 lb/min support for injector size  (Read 612 times)

hakcenter

  • dev team
  • *
  • Posts: 1047
    • 2006
    • Other
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
e85 lb/min support for injector size
« on: January 28, 2011, 10:48:50 AM »
Code: [Select]
Injector Size 100% Duty 80% Duty
390cc 21.80 lbs/min 17.44 lbs/min
450cc 25.15 lbs/min 20.12 lbs/min
550cc 30.74 lbs/min 24.59 lbs/min
580cc 32.42 lbs/min 25.94 lbs/min
650cc 36.33 lbs/min 29.07 lbs/min
660cc 36.89 lbs/min 29.51 lbs/min
680cc 38.01 lbs/min 30.41 lbs/min
720cc 40.24 lbs/min 32.20 lbs/min
750cc 41.92 lbs/min 33.54 lbs/min
780cc 43.60 lbs/min 34.88 lbs/min
850cc 47.51 lbs/min 38.01 lbs/min
880cc 49.19 lbs/min 39.35 lbs/min
950cc 53.10 lbs/min 42.48 lbs/min
1000cc 55.89 lbs/min 44.72 lbs/min
1150cc 64.28 lbs/min 51.42 lbs/min
1200cc 67.07 lbs/min 53.66 lbs/min
1600cc 89.43 lbs/min 71.55 lbs/min
1850cc 103.41 lbs/min 82.72 lbs/min

Mitsubishi OEM turbo specifications (including flow rates)
Mitsubishi OEM Turbo Specifications

Flow Rates @ 15psi:
TDO4-9B-6CM2 265 CFM
TDO5-12A-8CM2 320 CFM
TDO4-13G-5CM2 360 CFM
TEO4-13C-6CM2 360 CFM
TDO4L-13G-6CM2 360 CFM
TDO4L-15C-8.5CM2 390 CFM
TDO5H-14B-6CM2 405 CFM
TDO5H-14G-8CM2 465 CFM
TDO5H-16G-7CM2 505 CFM
TDO5H-16G-10CM2 505 CFM
TDO6-17C-8CM2 550 CFM
TDO6H-20G-14CM2 650 CFM
TDO7S-25G-17CM2 850 CFM
TFO8L-30V-18CM2 1200 CFM
Logged
AMP 2 Corinthians 8:21
For we take thought beforehand and aim to be honest and absolutely above suspicion, not only in the sight of the Lord but also in the sight of men.

1g20g

  • JACKAL Owner
  • *
  • Posts: 147
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 2G (small ports)
    • Turbo: 20g
Re: e85 lb/min support for injector size
« Reply #1 on: January 28, 2011, 08:44:18 PM »
Ha, wow i was just about to ask that only thing that sucks only one gas station in my area. >:(
Logged
k272s, eagle rods, mahle pistons, 2ghead, BC springs and retainers, 2g intake, ported 2g mani, arp head and main studs, BS removed. good ol 20g

citymunky

  • JACKAL Owner
  • *
  • Posts: 58
    • 1991
    • Galant VR-4
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
Re: e85 lb/min support for injector size
« Reply #2 on: January 29, 2011, 08:37:50 AM »
There only one on E85 station here too.
Logged
'91 Galant VR-4 (923/2000). TD05H-20G, 2g 8.5:1 CR Pistons/ HKS 264 Exhaust Cam/1g head/1g Non-Turbo throttle body/1g intake manifold/2g exhaust manifold/Victory Performance 2.5" o2 housing/Tial 40mm WG w/ open dump/Pacesetter 1g 3" downpipe/3" high flow cat/3" catback/

Airmail96

  • Full Member
  • ***
  • Posts: 96
  • Car Ramrod
    • 1993
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: 16G
Re: e85 lb/min support for injector size
« Reply #3 on: February 06, 2011, 08:05:57 AM »
Quote from: citymunky on January 29, 2011, 08:37:50 AM
There only one on E85 station here too.

Not true, there's one over at oceana, and then another over by the nex at norfolk lol. 
Logged
Jason
Stock motor, small16g, stock smic, -6an feed line, walboro 255

Future: FP2s, T/S HX-40 (8-Blade), Red Jack Racing T/S Manifold, FMIC, Tial Q, Hawver Intake Manifold, Walboro 255lph x2, Fuel Pump Rewire, Tial MV-S x2.  HE351Ve VGT(on the back burner),

citymunky

  • JACKAL Owner
  • *
  • Posts: 58
    • 1991
    • Galant VR-4
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
Re: e85 lb/min support for injector size
« Reply #4 on: February 06, 2011, 01:54:52 PM »
I just found out about the on at NOB. I never really had to go to NOB for anything before.
Logged
'91 Galant VR-4 (923/2000). TD05H-20G, 2g 8.5:1 CR Pistons/ HKS 264 Exhaust Cam/1g head/1g Non-Turbo throttle body/1g intake manifold/2g exhaust manifold/Victory Performance 2.5" o2 housing/Tial 40mm WG w/ open dump/Pacesetter 1g 3" downpipe/3" high flow cat/3" catback/
Pages: [1]