May 20, 2012, 12:23:42 PM
Pages: [1]

Author Topic: 2 piston calipers on 1991 awd...  (Read 596 times)

Kapok6

  • WEREWOLF Owner
  • *
  • Posts: 283
  • 'ello poppet
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 2G (small ports)
    • Turbo: FP3065
2 piston calipers on 1991 awd...
« on: November 09, 2011, 06:09:27 AM »
I got some 2 piston calipers off a dodge stealth es in the junk yard.  Obviously they are bigger than the stock single pistons I currently have.  My question is, will these work on my car, and, what is the difference between these and the 2 piston calipers from a 1995-1999 awd?  Where the line connects in is not banjo bolted like on the 2Gb's, its the same as the 1G.
Logged
1991 Eagle Talon TSi AWD-Ross 8:3.1 pistons, Eagle rods, ACL Race bearings, 2g small port head, HKS/Delta 272 cams, Evo springs/retainers, FP3065 @ 28psi (hopefully), FIC 1550's, Apex'i N1 turbo back exhaust, KYB GR-2's on Suspension Technnique springs, megan sturt bars, poly mounts/bushings

big_d

  • JACKAL Owner
  • *
  • Posts: 64
    • 1990
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: WH1C
Re: 2 piston calipers on 1991 awd...
« Reply #1 on: November 09, 2011, 06:20:51 AM »
Direct replacement for your 1ga one piston calipers.  Your original lines will screw right in the 2-piston calipers of the non-turbo 3000gt's and stealth's.
Logged

Kapok6

  • WEREWOLF Owner
  • *
  • Posts: 283
  • 'ello poppet
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 2G (small ports)
    • Turbo: FP3065
Re: 2 piston calipers on 1991 awd...
« Reply #2 on: November 09, 2011, 06:45:42 AM »
The rotors are different though right?  So I will need to get new rotors and new pads, and use the brackets off the stealth as well right?

Now are the n/t stealth brakes the same as the 2Gb awd brakes or are they smaller?
Logged
1991 Eagle Talon TSi AWD-Ross 8:3.1 pistons, Eagle rods, ACL Race bearings, 2g small port head, HKS/Delta 272 cams, Evo springs/retainers, FP3065 @ 28psi (hopefully), FIC 1550's, Apex'i N1 turbo back exhaust, KYB GR-2's on Suspension Technnique springs, megan sturt bars, poly mounts/bushings

big_d

  • JACKAL Owner
  • *
  • Posts: 64
    • 1990
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: WH1C
Re: 2 piston calipers on 1991 awd...
« Reply #3 on: November 09, 2011, 07:58:13 AM »
Correct. Buy new rotors and pads to fit an N/A stealth (or 2g for that matter)... and yes you will need the stealth brackets as well.  I believe the N/A stealth/3000gt calipers are identical to the 1GB awd T/E/L's two piston calipers. They both use the standard flare fitting where the line attaches to the caliper, where the 2G two piston calipers use the banjo fitting.  This makes the N/A stealth/3000gt a nice cheap/bolt-on upgrade for us 1GA guys.  I paid $50 for my calipers shipped off the 3s forums. I used advance auto rotors with PBR Axxis metal master pads.
Logged

Kapok6

  • WEREWOLF Owner
  • *
  • Posts: 283
  • 'ello poppet
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 2G (small ports)
    • Turbo: FP3065
Re: 2 piston calipers on 1991 awd...
« Reply #4 on: November 09, 2011, 10:04:16 AM »
OK.  I have no idea what the year of the stealth was, were they all the same?  I.E. I just punch in any year of stealth?
Logged
1991 Eagle Talon TSi AWD-Ross 8:3.1 pistons, Eagle rods, ACL Race bearings, 2g small port head, HKS/Delta 272 cams, Evo springs/retainers, FP3065 @ 28psi (hopefully), FIC 1550's, Apex'i N1 turbo back exhaust, KYB GR-2's on Suspension Technnique springs, megan sturt bars, poly mounts/bushings

big_d

  • JACKAL Owner
  • *
  • Posts: 64
    • 1990
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: WH1C
Re: 2 piston calipers on 1991 awd...
« Reply #5 on: November 09, 2011, 11:38:07 AM »
Yeah, just any year non-turbo 3s...91-99.
Logged

Kapok6

  • WEREWOLF Owner
  • *
  • Posts: 283
  • 'ello poppet
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 2G (small ports)
    • Turbo: FP3065
Re: 2 piston calipers on 1991 awd...
« Reply #6 on: November 09, 2011, 03:41:23 PM »
groovy.
Logged
1991 Eagle Talon TSi AWD-Ross 8:3.1 pistons, Eagle rods, ACL Race bearings, 2g small port head, HKS/Delta 272 cams, Evo springs/retainers, FP3065 @ 28psi (hopefully), FIC 1550's, Apex'i N1 turbo back exhaust, KYB GR-2's on Suspension Technnique springs, megan sturt bars, poly mounts/bushings

John_H

  • JACKAL Owner
  • *
  • Posts: 227
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: gt3076r
Re: 2 piston calipers on 1991 awd...
« Reply #7 on: November 10, 2011, 08:38:58 AM »
or just 1g big brake rotors and pads.  93-94 awd.

easier to find in stock.
Logged

Mr Peepers

  • JACKAL Owner
  • *
  • Posts: 62
  • Matt Morrison
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: HX35
Re: 2 piston calipers on 1991 awd...
« Reply #8 on: November 10, 2011, 03:38:50 PM »
All 2g AWD's(fronts) are also the same rotors as the late 1g awds.  Some systems have/had different part numbers for whatever reason.
Logged
Stock 6 bolt, 272/272, 7 blade HX35 w/ twin scroll manifold, old unknown name top to bottom FMIC, 1200's, single 255, e85, LC-1.

HX35- 10.57@128.9 QTP Auto/10.9@135.9 street tire 28psi
16g-   11.2@123.5 on 23 psi and QTPs
14b-   12.00@115.6 on street tires

Kapok6

  • WEREWOLF Owner
  • *
  • Posts: 283
  • 'ello poppet
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 2G (small ports)
    • Turbo: FP3065
Re: 2 piston calipers on 1991 awd...
« Reply #9 on: November 11, 2011, 05:46:13 PM »
got them on today.  INSANE difference over the single piston brake setup.  I have never been so excited about slowing down.
Logged
1991 Eagle Talon TSi AWD-Ross 8:3.1 pistons, Eagle rods, ACL Race bearings, 2g small port head, HKS/Delta 272 cams, Evo springs/retainers, FP3065 @ 28psi (hopefully), FIC 1550's, Apex'i N1 turbo back exhaust, KYB GR-2's on Suspension Technnique springs, megan sturt bars, poly mounts/bushings

stace

  • JACKAL Owner
  • *
  • Posts: 100
    • 1990
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 2G (small ports)
    • Turbo: small 16g
Re: 2 piston calipers on 1991 awd...
« Reply #10 on: January 23, 2012, 03:43:48 PM »
I cant remember what supplier i went thru but I picked up a complete set of drilled rotors, ceramic pads and braided flex lines
front and rear all in one order, designed  for a 2g front caliper swap on a 1g. It was a ebay compny here in canada, cheap but fit perfectly and so far havent warped
Logged
Pages: [1]