May 20, 2012, 12:17:27 PM
Pages: [1] 2

Author Topic: *RESOLVED* Need help logging  (Read 738 times)

slow1g

  • JACKAL Owner
  • *
  • Posts: 103
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: GT35R
*RESOLVED* Need help logging
« on: April 21, 2011, 06:20:08 PM »
I have the pay version of Jackel and I cant seem to figure out how to log or may be something is wrong. I have dsmlinks logging cable and I no the obo port works (steve tried his comp and logging cable on my car). I can plug my cable in my comp and go to the logger and press poll and click on all the sensors and the only one will show up is the iat sensor and that will go right to 212 and that is it. Could it be the logging cable? I need some help please :deadhorse 
Logged
Stock 6 bolt, gerrat GT35R with PTE bolt on houseing, 2g manifold, apex n1 full exhaust, fic 1450's, wally 255, punishment fmic,
went 12.4 with 16g at 21 psi

hakcenter

  • dev team
  • *
  • Posts: 1047
    • 2006
    • Other
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
Re: Need help logging
« Reply #1 on: April 21, 2011, 06:23:04 PM »
http://forums.ds-map.net/logging/cables/msg2163/#msg2163

What happens if you click DTR on then try to send ! ?

Is there anything in the visual log on the editor after you try to poll ? Try setting up the com port, choose your sensor(s), and hit poll. Then switch back to the editor, click the icon at the bottom right and see if there is any error messages in it.
Logged
AMP 2 Corinthians 8:21
For we take thought beforehand and aim to be honest and absolutely above suspicion, not only in the sight of the Lord but also in the sight of men.

slow1g

  • JACKAL Owner
  • *
  • Posts: 103
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: GT35R
Re: Need help logging
« Reply #2 on: April 21, 2011, 06:26:01 PM »
It does what you say it should do.
Logged
Stock 6 bolt, gerrat GT35R with PTE bolt on houseing, 2g manifold, apex n1 full exhaust, fic 1450's, wally 255, punishment fmic,
went 12.4 with 16g at 21 psi

hakcenter

  • dev team
  • *
  • Posts: 1047
    • 2006
    • Other
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
Re: Need help logging
« Reply #3 on: April 21, 2011, 06:31:07 PM »
Quote from: hakcenter on April 21, 2011, 06:23:04 PM
Is there anything in the visual log on the editor after you try to poll ? Try setting up the com port, choose your sensor(s), and hit poll. Then switch back to the editor, click the icon at the bottom right and see if there is any error messages in it.
Logged
AMP 2 Corinthians 8:21
For we take thought beforehand and aim to be honest and absolutely above suspicion, not only in the sight of the Lord but also in the sight of men.

slow1g

  • JACKAL Owner
  • *
  • Posts: 103
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: GT35R
Re: Need help logging
« Reply #4 on: April 21, 2011, 11:31:37 PM »
I did all you said to do and no luck. Ther is no error codes showing up.I have tried it all kinds of ways and some times the rpm or the iat will randomly show up but they are wrong like the rpm will be at zero with the car running and does not change. when the iat sensor pops on it will be at 212 and does not change :(
Logged
Stock 6 bolt, gerrat GT35R with PTE bolt on houseing, 2g manifold, apex n1 full exhaust, fic 1450's, wally 255, punishment fmic,
went 12.4 with 16g at 21 psi

hakcenter

  • dev team
  • *
  • Posts: 1047
    • 2006
    • Other
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
Re: Need help logging
« Reply #5 on: April 21, 2011, 11:53:59 PM »
Quote from: slow1g on April 21, 2011, 11:31:37 PM
I did all you said to do and no luck. Ther is no error codes showing up.I have tried it all kinds of ways and some times the rpm or the iat will randomly show up but they are wrong like the rpm will be at zero with the car running and does not change. when the iat sensor pops on it will be at 212 and does not change :(

If you can get back online tomorrow some time mid-day I'll try my best to figure this out.
Logged
AMP 2 Corinthians 8:21
For we take thought beforehand and aim to be honest and absolutely above suspicion, not only in the sight of the Lord but also in the sight of men.

slow1g

  • JACKAL Owner
  • *
  • Posts: 103
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: GT35R
Re: Need help logging
« Reply #6 on: April 26, 2011, 03:26:08 PM »
ok I still cant get this to work I need some more help  :crywave
Logged
Stock 6 bolt, gerrat GT35R with PTE bolt on houseing, 2g manifold, apex n1 full exhaust, fic 1450's, wally 255, punishment fmic,
went 12.4 with 16g at 21 psi

John_H

  • JACKAL Owner
  • *
  • Posts: 227
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: gt3076r
Re: Need help logging
« Reply #7 on: June 08, 2011, 10:37:14 PM »
mine is very similar.

pick some sensors, hit poll, and I can sometimes see some numbers, but they are whack.  Like coolant temps in the mid 300deg range when the car is cold.  173 volts systems voltage etc.
Logged

hakcenter

  • dev team
  • *
  • Posts: 1047
    • 2006
    • Other
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
Re: Need help logging
« Reply #8 on: June 09, 2011, 12:22:14 PM »
I'm gunna have to hi-jack one of your computers and figure this out. John your not using a Link cable right ? Keyspan ?

Seems really weird TBH, I know a few guys have a link cable working just fine, same with keyspan. Maybe there was a bum driver update or system update, could be firewall.. blah blah blah.
Logged
AMP 2 Corinthians 8:21
For we take thought beforehand and aim to be honest and absolutely above suspicion, not only in the sight of the Lord but also in the sight of men.

slow1g

  • JACKAL Owner
  • *
  • Posts: 103
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: GT35R
Re: Need help logging
« Reply #9 on: June 09, 2011, 08:48:33 PM »
Do you have dsmlinks logging cable?  If you do I might know how you can get it to work :o
Logged
Stock 6 bolt, gerrat GT35R with PTE bolt on houseing, 2g manifold, apex n1 full exhaust, fic 1450's, wally 255, punishment fmic,
went 12.4 with 16g at 21 psi

John_H

  • JACKAL Owner
  • *
  • Posts: 227
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: gt3076r
Re: Need help logging
« Reply #10 on: June 10, 2011, 02:59:20 PM »
no 'link cable, I use an older known working DSM datalogger cable made by Martin Standish.  I then have it null modemed, then the Keyspan adapter to usb on my very new HP laptop.

TMO logger works fine on it all the time, every time, but it does not log load rows, the wideband implementation is rudimentary and some other things are not as good.

MMSD works fine on Autotalons Palm3 and running thru this cable/logger.
Logged

hakcenter

  • dev team
  • *
  • Posts: 1047
    • 2006
    • Other
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
Re: Need help logging
« Reply #11 on: June 11, 2011, 12:52:42 PM »
Quote from: John_H on June 10, 2011, 02:59:20 PM
no 'link cable, I use an older known working DSM datalogger cable made by Martin Standish.  I then have it null modemed, then the Keyspan adapter to usb on my very new HP laptop.

TMO logger works fine on it all the time, every time, but it does not log load rows, the wideband implementation is rudimentary and some other things are not as good.

MMSD works fine on Autotalons Palm3 and running thru this cable/logger.

And your using the most recent build right ? Maybe its this parse.. I'll update the build tonight with a cast to byte and see if it fixes the issue.
Logged
AMP 2 Corinthians 8:21
For we take thought beforehand and aim to be honest and absolutely above suspicion, not only in the sight of the Lord but also in the sight of men.

hakcenter

  • dev team
  • *
  • Posts: 1047
    • 2006
    • Other
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
Re: Need help logging
« Reply #12 on: June 11, 2011, 10:42:36 PM »
updated jackal build to 107, try it out and let me know.
Logged
AMP 2 Corinthians 8:21
For we take thought beforehand and aim to be honest and absolutely above suspicion, not only in the sight of the Lord but also in the sight of men.

hakcenter

  • dev team
  • *
  • Posts: 1047
    • 2006
    • Other
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
Re: Need help logging
« Reply #13 on: June 13, 2011, 10:38:05 AM »
update ?
Logged
AMP 2 Corinthians 8:21
For we take thought beforehand and aim to be honest and absolutely above suspicion, not only in the sight of the Lord but also in the sight of men.

John_H

  • JACKAL Owner
  • *
  • Posts: 227
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: gt3076r
Re: Need help logging
« Reply #14 on: June 19, 2011, 08:17:53 PM »
ver 105.107 works now for logging.
Logged
Pages: [1] 2