May 20, 2012, 12:05:24 PM
Pages: [1]

Author Topic: jackal logger and MTX issue?  (Read 273 times)

stace

  • JACKAL Owner
  • *
  • Posts: 100
    • 1990
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 2G (small ports)
    • Turbo: small 16g
jackal logger and MTX issue?
« on: August 16, 2011, 06:48:30 PM »
OK I got my logger to work..turns out diodes are directional??? Anyway the wideband is off, is it the same case as the MMCD, My innovate MTX needs to adjust the voltage to 0v=8:1 and 5=22:1? And TPS at idle it should read 0 right? not 15% like it is now. everything else seems good!
Logged

slow1g

  • JACKAL Owner
  • *
  • Posts: 103
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: GT35R
Re: jackal logger and MTX issue?
« Reply #1 on: August 16, 2011, 09:16:16 PM »
It should be at 9-11% at idle :whistling
Logged
Stock 6 bolt, gerrat GT35R with PTE bolt on houseing, 2g manifold, apex n1 full exhaust, fic 1450's, wally 255, punishment fmic,
went 12.4 with 16g at 21 psi

stace

  • JACKAL Owner
  • *
  • Posts: 100
    • 1990
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 2G (small ports)
    • Turbo: small 16g
Re: jackal logger and MTX issue?
« Reply #2 on: August 17, 2011, 02:21:24 PM »
ok does anyone know what I should set my innovate MTX at so jackal can read wide band the same as the gauge?

Plus is it normal to idle at 11:1? seems rich just to sit there. I havent changes the base 2.0l maps
Logged

hakcenter

  • dev team
  • *
  • Posts: 1047
    • 2006
    • Other
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
Re: jackal logger and MTX issue?
« Reply #3 on: August 17, 2011, 08:59:46 PM »
Quote from: stace on August 17, 2011, 02:21:24 PM
ok does anyone know what I should set my innovate MTX at so jackal can read wide band the same as the gauge?

Plus is it normal to idle at 11:1? seems rich just to sit there. I havent changes the base 2.0l maps

11:1 waaay too rich, shoot, 13:1 is too rich.

Try to get 13.7 - 14.3
Logged
AMP 2 Corinthians 8:21
For we take thought beforehand and aim to be honest and absolutely above suspicion, not only in the sight of the Lord but also in the sight of men.

stace

  • JACKAL Owner
  • *
  • Posts: 100
    • 1990
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 2G (small ports)
    • Turbo: small 16g
Re: jackal logger and MTX issue?
« Reply #4 on: September 23, 2011, 06:03:47 PM »
OK got the logger to match the wideband preatty close now. And ya, its 13.1 now' Bit rich but fine for just starting out while I biuld  my set-up.
Logged

Spectre22

  • JACKAL Owner
  • *
  • Posts: 25
    • 1992
    • Eclipse GSX
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: EVO III
Re: jackal logger and MTX issue?
« Reply #5 on: May 09, 2012, 07:58:41 AM »
I have never been able to get jackel and logworks to mach up right on. I have adjusted the scaling in both many times over and over but you can get them close enough so it works. Has anyone ever gotten them dead on to each other and if so what settings did you use in jackel and in the lc1 programer?
Logged
92 GSX auto, Evo III 16g ported, DSMap, FP exaust manifold, Punishment racing Intercooler piping, Innovative LC1, Tubular o2 housing, 3" downpipe, Greddy BOV, FP 255 fuel pump, FIC 750cc injectors, AFPR set at 43psi
Pages: [1]