May 20, 2012, 12:03:30 PM
Pages: 1 [2]

Author Topic: cables  (Read 1410 times)

slow1g

  • JACKAL Owner
  • *
  • Posts: 103
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: GT35R
Re: cables
« Reply #15 on: April 18, 2011, 07:46:23 PM »
yes nothing shows up. when i push poll accl goes to zero and that is it.
Logged
Stock 6 bolt, gerrat GT35R with PTE bolt on houseing, 2g manifold, apex n1 full exhaust, fic 1450's, wally 255, punishment fmic,
went 12.4 with 16g at 21 psi

Ravewolf

  • WEREWOLF Owner
  • *
  • Posts: 32
  • Tuner Wannabe
    • 1991
    • Talon TSI
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: 14b
Re: cables
« Reply #16 on: April 22, 2011, 11:55:06 AM »
Hijacking, but I built the cable just like the diagram(I think. The diode must go on pin three, right?), and nothing.
Logged
91 Eagle Talon TSI-Stock head, cams, FIC 850s, HDR MBC, ECMLink Socketed ECU, Stock 14b,3" exhaust turbo back(no cat,muffler),LC1, SMIC,stock bov,stock internals, balance shafts, stock coils

2.3colt

  • JACKAL Owner
  • *
  • Posts: 129
    • 1989
    • Colt
    • Motor: 4G63 2.3L (stroked)
    • Head: 1G (large ports)
    • Turbo: evoIII 16
Re: cables
« Reply #17 on: April 22, 2011, 05:37:02 PM »
this is the cable I made to run on my 90 talon back in 05... now it is used in my 89 colt with all 90 dsm electronics with no issues at all.. this is the cable I connected to his car with my laptop and it worked.. so I think its his dsmlink cable thats making it not connect.

http://www.fascinationsoftware.com/FS/html/DSM_DataCable.html

Steve
Logged

Ravewolf

  • WEREWOLF Owner
  • *
  • Posts: 32
  • Tuner Wannabe
    • 1991
    • Talon TSI
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: 14b
Re: cables
« Reply #18 on: April 23, 2011, 06:20:04 AM »
Quote from: 2.3colt on April 22, 2011, 05:37:02 PM
this is the cable I made to run on my 90 talon back in 05... now it is used in my 89 colt with all 90 dsm electronics with no issues at all.. this is the cable I connected to his car with my laptop and it worked.. so I think its his dsmlink cable thats making it not connect.

http://www.fascinationsoftware.com/FS/html/DSM_DataCable.html

Steve
'O.o'.....yea....um....no. But thanks anyway! I think I'd burn my apt down trying to make something that complicated.....
Logged
91 Eagle Talon TSI-Stock head, cams, FIC 850s, HDR MBC, ECMLink Socketed ECU, Stock 14b,3" exhaust turbo back(no cat,muffler),LC1, SMIC,stock bov,stock internals, balance shafts, stock coils

slow1g

  • JACKAL Owner
  • *
  • Posts: 103
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: GT35R
Re: cables
« Reply #19 on: May 08, 2011, 10:55:24 PM »
Ok so today I got to use my friends keyspan adapter, null modem adapter, and palm cable and it worked great. we tryed the dsmlink cable on his computer and it did the same thing it does to mine so I dont thank that the dsmlink cable works.:whistling    Now I have to make a logging cable, I wasted my money :(
Logged
Stock 6 bolt, gerrat GT35R with PTE bolt on houseing, 2g manifold, apex n1 full exhaust, fic 1450's, wally 255, punishment fmic,
went 12.4 with 16g at 21 psi

hakcenter

  • dev team
  • *
  • Posts: 1047
    • 2006
    • Other
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
Re: cables
« Reply #20 on: May 09, 2011, 10:09:29 AM »
Talk to link and get your money back ?
Logged
AMP 2 Corinthians 8:21
For we take thought beforehand and aim to be honest and absolutely above suspicion, not only in the sight of the Lord but also in the sight of men.

2.3colt

  • JACKAL Owner
  • *
  • Posts: 129
    • 1989
    • Colt
    • Motor: 4G63 2.3L (stroked)
    • Head: 1G (large ports)
    • Turbo: evoIII 16
Re: cables
« Reply #21 on: May 09, 2011, 11:00:20 AM »
Quote from: slow1g on May 08, 2011, 10:55:24 PM
Ok so today I got to use my friends keyspan adapter, null modem adapter, and palm cable and it worked great. we tryed the dsmlink cable on his computer and it did the same thing it does to mine so I dont thank that the dsmlink cable works.:whistling    Now I have to make a logging cable, I wasted my money :(

told ya it was the cable lol.. now maybee you will listen to me a lil more hehe.. :hug


Steve
Logged

El Gallo

  • JACKAL Owner
  • *
  • Posts: 22
    • 1992
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: hx-35
Re: cables
« Reply #22 on: May 09, 2011, 06:11:03 PM »
I also bought an ecmlink cable. So this means I too wasted my money?? This sucks :deadhorse
Hak, so how are the cables coming along, any updates on them???
thanks.
Logged

El Gallo

  • JACKAL Owner
  • *
  • Posts: 22
    • 1992
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: hx-35
Re: cables
« Reply #23 on: May 09, 2011, 08:29:41 PM »
Desrigard my question about the cables Hak. I thought that this was the logger cables thread.   Just read it.
Logged

1990talonfast

  • JACKAL Owner
  • *
  • Posts: 147
    • 1990
    • Colt
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: EvB16G
Re: cables
« Reply #24 on: June 03, 2011, 02:43:45 PM »
I just went to my local Altex Computers and bought a regular serial to usb, female/female (not sure what exactly it was) adapter and a null modem for $15.00 out the door, than using the obd1 to serial I already had for mmcd, I hooked everyrhing up and stuff just worked  :clap
Logged

John_H

  • JACKAL Owner
  • *
  • Posts: 227
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: gt3076r
Re: cables
« Reply #25 on: June 12, 2011, 08:02:52 PM »
you got lucky 1990talonfast!

Most people can't get any usb/serial adapters to work with any DSM datalogger but the Keyspan ones.  Autotalon also tried another brand and it won't do anything. 

I hear the Hakcenter ones work really well and everything...
Logged
Pages: 1 [2]