May 20, 2012, 12:00:56 PM
Pages: [1] 2

Author Topic: cables  (Read 1410 times)

stace

  • JACKAL Owner
  • *
  • Posts: 100
    • 1990
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 2G (small ports)
    • Turbo: small 16g
cables
« on: March 29, 2011, 12:54:24 PM »
Will a 1g dsmlink v2 cable work for logging? On jackal or even mmcd?
Logged

hakcenter

  • dev team
  • *
  • Posts: 1047
    • 2006
    • Other
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
Re: cables
« Reply #1 on: March 29, 2011, 06:46:45 PM »
should, however it is a overly priced cable unless you got it for free :shakefist
Logged
AMP 2 Corinthians 8:21
For we take thought beforehand and aim to be honest and absolutely above suspicion, not only in the sight of the Lord but also in the sight of men.

stace

  • JACKAL Owner
  • *
  • Posts: 100
    • 1990
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 2G (small ports)
    • Turbo: small 16g
Re: cables
« Reply #2 on: March 30, 2011, 03:20:39 PM »
I agree, for the most part about dsmlink. But they sell usb cables for 55. I would have to buy a keyspan adapter, for 35 and some risistors, and junk. Then I would have to biuld it and it would prolly look horriable. Plus I would have to either wire it into my aldl port or pay more for a aldl connector.  Id rather pay the extra 20 and have it look good and know that it works when I get it. 
Logged

CrackedDSM

  • Banned
  • ***
  • Posts: 148
    • 91
    • Eclipse GSX
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: Evo 3 16G
Re: cables
« Reply #3 on: March 30, 2011, 03:46:59 PM »
That, or you could find yourself an old pocketlogger cable, get yourself a keyspan adapter and null-modem, and you're done. :)  I got my keyspan off of eGay for $20 shipped, and the null modem for $3 shipped off amazon, lewl.  Can't remember what I paid for the pocketlogger cable you can usually find them cheap though since no one wants one. 
Logged
91 Auto GSX - Fully Ported Evo 3 16G, 660cc injectors, Walbro 255 HP rewired, VRSF FMIC with 2.5" piping, GM 3 Bar map, Jackal, AEM Wideband, 2G pistons on 1G rods w/ARP rod studs, Cyclone IM, custom COP, 3" turboback exhaust, custom shift box, NGR Type S, stock FPR, GT exhaust manifold.

slow1g

  • JACKAL Owner
  • *
  • Posts: 103
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: GT35R
Re: cables
« Reply #4 on: April 14, 2011, 08:50:25 PM »
I just bought A 1g dsmlink cable and it does not work. Could it be because I have a old version of jackel?  :rtfm
Logged
Stock 6 bolt, gerrat GT35R with PTE bolt on houseing, 2g manifold, apex n1 full exhaust, fic 1450's, wally 255, punishment fmic,
went 12.4 with 16g at 21 psi

hakcenter

  • dev team
  • *
  • Posts: 1047
    • 2006
    • Other
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
Re: cables
« Reply #5 on: April 14, 2011, 11:51:31 PM »
Quote from: slow1g on April 14, 2011, 08:50:25 PM
I just bought A 1g dsmlink cable and it does not work. Could it be because I have a old version of jackel?  :rtfm

ill reply later, with a for sure test method using terminal.exe (sorry windows only) to ensure working awesomeness.
Logged
AMP 2 Corinthians 8:21
For we take thought beforehand and aim to be honest and absolutely above suspicion, not only in the sight of the Lord but also in the sight of men.

slow1g

  • JACKAL Owner
  • *
  • Posts: 103
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: GT35R
Re: cables
« Reply #6 on: April 16, 2011, 10:56:55 AM »
SO it will work with windows because i have windows?
Logged
Stock 6 bolt, gerrat GT35R with PTE bolt on houseing, 2g manifold, apex n1 full exhaust, fic 1450's, wally 255, punishment fmic,
went 12.4 with 16g at 21 psi

hakcenter

  • dev team
  • *
  • Posts: 1047
    • 2006
    • Other
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
Re: cables
« Reply #7 on: April 16, 2011, 12:27:43 PM »
Quote from: slow1g on April 16, 2011, 10:56:55 AM
SO it will work with windows because i have windows?


Yes.

Terminal Program
Choose the right com port
Change to custom baud
Change custom baud from 9600 to 1953
Change receive window from ASCII to HEX


Sending !, is the equivilant to 0x21 (RPM)

It should return 21 00, with the car off key on.
Logged
AMP 2 Corinthians 8:21
For we take thought beforehand and aim to be honest and absolutely above suspicion, not only in the sight of the Lord but also in the sight of men.

slow1g

  • JACKAL Owner
  • *
  • Posts: 103
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: GT35R
Re: cables
« Reply #8 on: April 16, 2011, 10:08:29 PM »
what do I do after this?
Logged
Stock 6 bolt, gerrat GT35R with PTE bolt on houseing, 2g manifold, apex n1 full exhaust, fic 1450's, wally 255, punishment fmic,
went 12.4 with 16g at 21 psi

hakcenter

  • dev team
  • *
  • Posts: 1047
    • 2006
    • Other
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
Re: cables
« Reply #9 on: April 16, 2011, 10:50:14 PM »
Quote from: slow1g on April 16, 2011, 10:08:29 PM
what do I do after this?

if it returns 21 00, the cable works.
Logged
AMP 2 Corinthians 8:21
For we take thought beforehand and aim to be honest and absolutely above suspicion, not only in the sight of the Lord but also in the sight of men.

slow1g

  • JACKAL Owner
  • *
  • Posts: 103
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: GT35R
Re: cables
« Reply #10 on: April 17, 2011, 07:11:18 PM »
It returns to 21 00, but it still does not work I can start jackel with the loging cable in and nothing shows up. I cant click the items below? Steve with the colt showed me his and his items are gray and when you click on them they turn black, mine are always black with the cable in or out. This is killing me! :deadhorse
Logged
Stock 6 bolt, gerrat GT35R with PTE bolt on houseing, 2g manifold, apex n1 full exhaust, fic 1450's, wally 255, punishment fmic,
went 12.4 with 16g at 21 psi

hakcenter

  • dev team
  • *
  • Posts: 1047
    • 2006
    • Other
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
Re: cables
« Reply #11 on: April 17, 2011, 09:09:08 PM »
Quote from: slow1g on April 17, 2011, 07:11:18 PM
It returns to 21 00, but it still does not work I can start jackel with the loging cable in and nothing shows up. I cant click the items below? Steve with the colt showed me his and his items are gray and when you click on them they turn black, mine are always black with the cable in or out. This is killing me! :deadhorse

Is there nothing in the com ports ?

Make sure the cables in for a couple seconds, then boot up jackal, hopefully you see a list of available com ports in the drop down.
Logged
AMP 2 Corinthians 8:21
For we take thought beforehand and aim to be honest and absolutely above suspicion, not only in the sight of the Lord but also in the sight of men.

2.3colt

  • JACKAL Owner
  • *
  • Posts: 129
    • 1989
    • Colt
    • Motor: 4G63 2.3L (stroked)
    • Head: 1G (large ports)
    • Turbo: evoIII 16
Re: cables
« Reply #12 on: April 18, 2011, 12:34:33 AM »
he has the dsmlink cable for a 1g.. even tho his car is a 91 all the electronics including the ecu are 90... im not sure if the links cable works on 90s I know on mine I have to use a cable with a power wire on it... I put my cable and laptop on his car and it logges so I know the diag port works.


Steve
Logged

slow1g

  • JACKAL Owner
  • *
  • Posts: 103
    • 1991
    • Talon TSI AWD
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
    • Turbo: GT35R
Re: cables
« Reply #13 on: April 18, 2011, 01:30:31 AM »
Yes it shows up in the com port.
Logged
Stock 6 bolt, gerrat GT35R with PTE bolt on houseing, 2g manifold, apex n1 full exhaust, fic 1450's, wally 255, punishment fmic,
went 12.4 with 16g at 21 psi

hakcenter

  • dev team
  • *
  • Posts: 1047
    • 2006
    • Other
    • Motor: 4G63 2.0L
    • Head: 1G (large ports)
Re: cables
« Reply #14 on: April 18, 2011, 10:11:43 AM »
Quote from: slow1g on April 18, 2011, 01:30:31 AM
Yes it shows up in the com port.

And its the same one you used in terminal to verify ? Did you hit poll and click on some sensors ?
Logged
AMP 2 Corinthians 8:21
For we take thought beforehand and aim to be honest and absolutely above suspicion, not only in the sight of the Lord but also in the sight of men.

Pages: [1] 2